Converter
Embedded module
Industrial Ethernet Devices
Converters
ZigBee type
Интерфейсы		Ethernet
Устройство имеет		Программируемый
Serial ports		RS-232
Тип модуля		Extension module
Switch features		Non-fiber
Converter type		Programmable converter

Каталог ПреобразователиКонвертерыEthernetВстраиваемые

EM1206

Документация и программное обеспечение


Data Sheet	Software

EM1206

BASIC-programmable Serial to Ethernet Converter - Ethernet Module

Особенности продукта

Спросить про цену »

Задать вопрос об изделии

Описание продукта
Технические параметры

The EM1206 is a miniature BASIC-programmable embedded module. In combination with the RJ203 jack/magnetics, the EM1206 occupies only 34.5x19 mm of board space. Alternatively, the EM1206 can be used with any suitable magnetics and jack.

The module's hardware mix, which includes 100Base/T Ethernet, four serial ports, flash disk, EEPROM, and RTC, has been carefully tailored to address the typical needs of network-enabled control applications.

This makes the EM1206 especially suitable for "connected" edge products such as sensors, network-enabled card readers, actuators, and other lightweight devices.

The EM1206 can also support Wi-Fi communications (this requires GA1000 add-on board), as well as external LCD, keypad, and buzzer.

The EM1206 can be ordered standalone or in combination with the RJ203 module.

В нижеприведенной таблице представлены технические параметры изделия. В случае, если указанной в таблице информации не достаточно, либо данные вызывают сомнения, просим связаться с нашим техническим отделом по электронной почте или телефону. Специалисты помогут подобрать устройство, максимально отвечающее требованиям Вашего проекта.

Specification
Hardware:	10/100BaseT Ethernet Port
	Four serial ports; up to 17 I/O lines
	Mates with RJ203 jack/magnetics
	Flash disk and RTC onboard
	Supports Wi-Fi, LCD, keypad, buzzer
	Very compact (33.2x18.1x5.5mm)
Properties:	Based on a high-performance purpose-built 88-MHz ASIC (T1000).
	10/100BaseT auto-MDIX Ethernet port (no magnetics).
	Optional Wi-Fi interface (requires GA1000 add-on module).
	Four high-speed serial ports (CMOS-level):
	Baudrates of up to 921,600bps;
	None/even/odd/mark/space parity modes;
	7/8 bits/character modes;
	Full-duplex mode with optional flow control;
	Half-duplex mode with direction control;
	Encoding and decoding of Wiegand and clock/data streams.
	Up to 1024KB flash memory for firmware, application, and data.
	2KB EEPROM for data storage.
	RTC with backup power input.
	Supports external LCD and keypad.
	Programmable square-wave output for external buzzer.
	Up to 17 general-purpose I/O lines (including 8 interrupt lines).
	Control lines for two external status LEDs.
	Four status LEDs onboard:
	Green and red status LEDs;
	Green and yellow Ethernet status LEDs.
	Software-controlled onboard PLL.
	Reliable power-on/brown-out reset circuit.
	Power: 230mA @ 3.3V (100BaseT mode, PLL on).
	Dimensions: 33.2x18.1x5.5mm.
	Firmware is upgradeable through the serial port or network.
Programming:	Sock — socket comms (up to 16 UDP, TCP, and HTTP sessions).
	Net — controls Ethernet port.
	Wln — handles Wi-Fi interface (requires GA1000 add-on module).
	Ser — in charge of serial channels.
	Io — handles I/O lines, ports, and interrupts.
	Kp — scans keypads of matrix and "binary" types.
	Rtc — keeps track of date and time.
	Fd — manages flash memory file system and direct sector access.
	Stor — provides access to the EEPROM.
	Romfile — facilitates access to resource files (fixed data).
	Pat — "plays" patterns on green and red status LEDs.
	Beep — generates buzzer patterns.
	Button — monitors the setup button.
	Sys — in charge of general device functionality.