Marine operator panels The EXTER series offers a broad range of robustly designed
operator panels. The range includes varying sizes and capabilities and consists
of thirteen standard models, seven with touch-screen interface and six with keypad
interface. The touch-screen models feature 3.5 to 15 inch displays, with a number
of models and sizes also available in black and black sun-readable versions.
Enables full control with space saving efficiency
Seamless operational compatibility with all major brands of control equipment
Rugged and reliable design for the specifics of maritime requirements
Fully certificated with the major nautical classification societies
Sun-readable models
Compass safe distance defined
100% dimmable
IP66 front resistant to dust and high pressure water jets
Narrow mounting depth
Easy-to-clean powder-coated aluminum frame and casing
optimal view with sunreadable display
Unpredictable light conditions at sea often
limit the effectiveness of other operator panels. Beijer Electronics’ operator panels
make operational tasks easy, be it at night or in the glare of direct sunlight.
Indicators, bar-graphs and switches presented clearly on the interface
Dimmable backlight preserves optimal night vision
Sun-readable models fully operable even in glare of direct sunlight
Clear high-resolution screens
High level of detail on images, charts, meters and alarms
В нижеприведенной таблице представлены технические параметры изделия. В случае, если указанной в таблице информации не достаточно, либо данные вызывают сомнения, просим связаться с нашим техническим отделом по электронной почте или телефону. Специалисты помогут подобрать устройство, максимально отвечающее требованиям Вашего проекта.
g-4500-sim300
Hardware specifications
Display
TFT-LCD. 640 x 480 pixels, 64K color.
CCFL backlight lifetime at the ambient temperature of
+25 C: >50,000 h.
Screen size
6.5"
Active area of display, W x H
131.5 x 98.6 mm
Front panel seal
IP 66
Rear panel seal
IP 20
Touch screen material
Touch screen: Polyester on glass, 1 million finger touch
operations.
Overlay: Autotex F157 or F207.
Reverse side material
Powder-coated aluminum
Processor
416 MHz RISC CPU (Intel Xscale)
Flash memory
32 MB (Intel StrataFlash)
Flash memory for application
12 MB (incl. fonts)
Memory RAM
64 MB
Real time clock
±20 PPM + error because of ambient temperature.
Total maximum error: 1 min/month at 25 C
Temperature coefficient: -0.034±0.006 ppm/C2
Real time clock battery
CR2450 (UL and cUL: Sanyo or Panasonic)
Minimum lifetime: 3 years
Power consumption at rated voltage
Normal: 0.4 A
Maximum: 0.9 A
Fuse
Internal fuse, 3.15 AT, 5 x 20 mm
Power supply
+24 V DC (20 - 30 V DC). 3-pin jack connection block.
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the requirements
for class II power supplies.
Operating temperature
Vertical installation: 0 to +50 C
Horizontal installation: 0 to +40 C
Storage temperature
-20 to +70 C
Relative operating humidity
5 - 85 % non-condensed
Certificates and Approvals
CE approvals
Noise tested according to EN61000-6-4 emission and
EN61000-6-2 immunity.
UL, cUL approvals (when product or packing is marked)
UL 1604 Class I, Div 2 / UL 508 / UL 50 4x indoor use only
DNV
Yes
NEMA
4x indoor use only
Germanischer Lloyd
Yes
IACS
Yes
RINA
Yes
Communication
Serial port RS422/RS485
25-pin D-sub contact, female with
standard locking screws 4-40 UNC.
Serial port RS232C
9-pin D-sub contact, male with standard locking screws 4-40
UNC.
Ethernet
10/100 Mbit/s. Shielded RJ 45
USB
Host type A (USB 1.1), max output current 500mA
Device type B (USB 1.1)
Введение 
