This unit is designed to provide an RS-422/485 connection to fiber cable where the connected devices have RS-422/485 interfaces. It enables serial devices such as CNCs and PLCs to instantly connect to an existing Ethernet / Fast Ethernet network. This Serial-to-Ethernet Device Server is a robust device controller for MIS personnel. Now you can attach up to four serial devices to Fast Ethernet by using one device.

• Complies with EIA/TIA-422/485 standards
• 100Mbps Fast Ethernet fiber port and 4-ports RS-422/485
• Supports serial port asynchronous data rates up to 115.2 Kbps
• Relay output for power failure and link down
• Available with ST/SC connector for Multi-mode or SC connector for Single Mode
• Extends distance of up to 2km (6600 feet) with multi-mode fiber and 120km (396000 feet) with long-haul single-mode fiber
• Terminal Block for RS-422/485 wiring
• DIP switch for 4-wire full and 2-wire asynchronous transmission
• Extends distances up to 1.2km for 24AWG Shielded Twisted Pair Cable
• DIP switches to enable/disable alarm function
• LEDs for ‘at-a-glance’ device status
• Suitable for industrial harsh environment
• Wide voltage range (9 ~ 48V DC)
• Redundant dual DC power inputs with Terminal Block
• FCC Class A & CE approved

Standards: IEEE 802.3u (100BASE-FX/ Fast Ethernet); EIA/TIA RS-422/485; EIA/TIA-574
Ports: 1x Fiber; Single Mode / Multi-Mode 4x 5-pin terminal block serial connector
Max. Distance: Fiber: Up to 120,000 meters
Serial: 1,200 meters (RS-422/485)
Data Rates: Fiber: 100 Mbps
Serial: 115.2 kbps (asynchronous)
Signals: RS-422: TxD+/-, RxD+/-, GND RS-485: Data+, Data-, GND
Switches:
DIP 1: Enables / disables primary power alarm
DIP 2: Enables / disables redundant power alarm
DIP 3: Enables / disables fiber port alarm
DIP 4: 2W 485 (ON) and 4W 422/485 (OFF) operations mode
DIP 5: Enables / disables termination (TMR) at serial port-1
DIP 6: Enables / disables termination (TMR) at serial port-2
DIP 7: Enables / disables termination (TMR) at serial port-3
DIP 8: Enables / disables termination (TMR) at serial port-4
Power: External power adapter; 9~48V DC @ 1A
Environment: Temperature:
Operating: 0^oC to 70^oC
Relative Humidity: 10% to 80%, non-condensing
Storage: -20^oC to 80^oC
Relative Humidity: 5% to 90%, non-condensing
Emissions: FCC Part 15 of Class A & CE approved
Dimensions: 120 x 50 x 162mm (D x W x H)
Weight: 780 grams