KIEN2000-2S is an unmanaged 8-port industrial Ethernet rail switch. It offers two redundant 100Mbit/s fiber ports and six 10/100Base-T/TX TP ports. With the plug-and-play feature, it is started up shortly. KIEN2000-2S offers 24V redundant power inputs.
В нижеприведенной таблице представлены технические параметры изделия. В случае, если указанной в таблице информации не достаточно, либо данные вызывают сомнения, просим связаться с нашим техническим отделом по электронной почте или телефону. Специалисты помогут подобрать устройство, максимально отвечающее требованиям Вашего проекта.
Features
High-performance Industrial Ethernet Switch
10/100Base-T/TX Ethernet ports, adaptive, full/half duplex, Auto MDI/MDI-X connection
100Base-FX fiber ports, multimode, full duplex
High speed redundant ring network (recovery time<300ms)
Alarm relay output for power.
Store-and-forward switching mode conforms to IEEE802.3/802.U/802.3X
Industrial Power Supply
Industrial power input of DC24V（DC18V～36V）.
Reliable protection for EMC and against over-current/over-voltage
Redundant power input.
Rugged Design
Solid IP40 housing
Easy DIN-Rail mounting or optional wall-mounting
Ribbed heat-removal design(fanless); operation at -35C to +75C
Main Functions
100Mbit/s Optical Fiber Redundancy
It is critical for network to re-configure immediately once disconnection occurs in the industrial fields. Accordingly, KIEN2000 comes with DT-Ring, which is developed by KYLAND, and offers 2 redundant fiber ports to realize the redundant ring network. The system will be able to re-configure within 300ms after connection fault.
LED Indicator
The LEDs of the front panel indicate the port status correctly including transmission rate, link status and system status..
Layer-2 Switching
Switches work in two ways: Cut-Through and Store-and-Forward. In Cut-Through, a data packet is immediately relayed further after detecting the target address; in Store-and-Forward, a data packet is first read-in completely and checked for errors before the switch relays the same. KIEN2000B employs Store-and-Forward that is a switching mode widely used.
Power Alarming
Any power of KIEN2000 fails, alarm signal will be sent out by alarm terminal. The terminal is open when there is no alarm and is closed when alarm occurs
Parameters
Product Description
Model
KIEN2000-2M
Description
Unmanaged Industrial Ethernet Rail Switch, store and forward switching mode, Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s)
Port Type and Quantity
2 x 100Base-FX, optical fiber cable, redundant, duplex 6 x 10 /100Base-T/TX, TP cable, RJ45 Socket (shielded), auto-negotiation, auto-polarity
More Interface
Power Terminal
2 x DC power terminal, 3-core
Alarm Terminal
1 x alarm output terminal, 2-core
Network size-length of cable
Twisted pair (TP)
100m
Singlemode fiber
Distance: 40km(60km, 80km for special requirement) Wavelength: 1310/1550nm Optical power: >-13dbm
Введение 
100 TX / 100 FX
Одномодийные
Мультимодийные
100 TX
