NPE M1000 is a series of x86 industrial computers which you can easily adapt to your needs by choosing from the available options. Upgraded NPE M1000 industrial computer series is powered by Quad-core Intel Atom x5 Z8350 1.44GHz (up 1.92GHz) processor, eqiupped withup to 4GB DDR3 RAM, up to 64GB eMMC on-board and Gigabit Ethernet for high performance. NPE features industrial protocol support, e.g. Modbus, M-Bus, SNMP, MQTT and more.
Ready-to-use programmable automation controller
The NPE M1000platform has a variety of functionalities and is easy to configure at the same time– it combines ease of use, characteristic of simple devices with the possibilities of embedded computers.
State of the art performance reached with Quad-Core Intel Atom x5 Z8350 1,44GHz fanless processor,allows using NPE M1000 device for specific application, like remote monitorng, data logging, protocol converting or SmartGrid remote control
Hardware resources
Base version
Quad-Core Intel Atom x5 Z8350 1,44GHZ (up 1,92GHz)processor
1/2/4 GB DDR3L RAM,16/32/64GB eMMC FLASH
Rich set of I/O interfaces: 4x Digital Input, 4x Digital Output
Economic 1-Wire bus, typically used for reading temperature and humidity sensors
NPE M1000telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:
The design of the NPE M1000 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The Linux system provides stable operation of the device.
NPE M1000 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.
NPE M1000 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.
NPE M1000 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.
Due to the Linux operating system - NPE M1000 is a stable central unit of an automation system.
With a built-in GSM modem, NPE M1000 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.
You can build a VPN with NPE M1000. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.
3G technology provides higher speed and lower latency at packet data transmission.
With a built-in GSM modem, the NPE M1000 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).
You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.
System supervisor will immediately receive SMS or e-mail notification.
GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.
Additional features
iMod Platform Support.NPE M1000 can easily work with iMod telemetry modules and in nearest future with iMod M1000.
iModCloud Ecosystem. A combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.
iModCloud - Dedicated Cloud Service
iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE M700 devices.
With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.
В нижеприведенной таблице представлены технические параметры изделия. В случае, если указанной в таблице информации не достаточно, либо данные вызывают сомнения, просим связаться с нашим техническим отделом по электронной почте или телефону. Специалисты помогут подобрать устройство, максимально отвечающее требованиям Вашего проекта.
Technical specification
System
CPU
Intel Atom x5 Z8350 1.44GHz (do 1.92GHz)
RAM
1/2/4 GB DDR3L
Flash Memory
16/32/64 GB eMMC
Operating system
Linux 4.4+, Microsoft Windows 10, Linux (ubilinux, Ubuntu, Yocto), Android Mashmallow
Real Time Clock
RTC, 240 byte SRAM, Wath Dog Timer
Serial ports
RS-232 / RS-485 Ports
1x RS-232 (3 pins) / 1x RS-485 (2 pins)
Ethernet Interface
1x Ethernet 10/100/1000 Mbps
USB ports
4x external USB 2.0 (host), 1x external USB 3.0 (OTG)
Inputs/outputs
Digital inputs (DI)
4x DI (0..5V DC
Digital outputs (DO)
4x DO (0..30V), max. power efficiency: 500 mA
Configurable I/Os
4x DI/DO, max. power efficiency: 500 mA
1-Wire
1x 1-Wire
Audio/Video
1x HDMI 1.4b
Power supply
9 ~ 24 V AC/DC, 1000 mA
Mechanical parameters
Dimensions
91 x 106 x 61 mm
Weight
300g
Casing
ABS, DIN bus instalation
Operating and storage conditions
0 ~ 60°C, humidity: 10 ~ 80% RH (no condensation)
Available expansion cards
Wi-Fi (IEEE 802.11 b/g/n, speed up to 150 Mbps, 64/128-bit WEP, WPA, and WPA2) LTE/3G/GPRS modem, GPS module Bluetooth, ZigBee, ExCard modules
Connectors and physical interfaces
3x monostable switch button 2x16 pin screw terminal, 4x USB 2.0 type A, 1x USB 3.0, 1x 2 pin power, 1x SIM CARD slot, 1x HDMI, 1x RJ45
Industrial computer NPE X500, ARM11 700 MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Wath Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x CAN, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot
Industrial computer NPE X500, ARM11 700 MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Wath Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x CAN, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot